What are the installation procedures for laying artificial turf on a football field?

1. Site clearance
2. The foundation surface must be cleaned thoroughly, with no residual construction waste, debris, gravel, etc. allowed.
3. The flatness must meet the requirements. If it does not meet the requirements, strong mortar should be used to repair it until it meets the requirements.
4. The drainage pipe must be inspected and cleared.

II. Setting out

1. It is best to conduct setting-out on sunny days. According to the drawings, clearly mark the width of the lines on the ground and ensure that they are not easily erased during the construction of the artificial turf soccer field.
2. Re-inspect to ensure the correctness of the functional line markings on the site.

3、 Laying artificial turf
The laying of artificial turf should be carried out on sunny days.
Unfold the artificial lawn in order, lay it flat and stretch it, and release internal stress.
Ensure that the direction of the artificial turf is consistent. Inconsistent directions may cause visual color differences

4、 Splicing and bonding of artificial turf

1. Bring two adjacent artificial lawns closer to the normal lawn spacing, lay them flat, and cut off one side of the strip while retaining the other side. Open the artificial lawn that has been trimmed, and evenly apply the seam adhesive on the back edge of the lawn and the reserved edge material, with a width of not less than 5 centimeters.
   If artificial turf without edge materials needs to be spliced, seam tape must be used. After trimming and bringing the artificial lawn to the appropriate position, open the edge of the artificial lawn and lay the joint tape flat. Apply joint glue evenly on the edge and joint tape of the artificial lawn, with a width of not less than 5cm.
   When the solvent in the glue evaporates until the glue surface is not sticky to the hands, bond the lawn and use a rubber hammer to tap or mechanically compact it.

5、 Cutting and bonding of marking lines
Cut the white grass marking line according to the standard width, with a width error not exceeding 3mm.
The construction of an artificial grass soccer field involves identifying the lines drawn on the foundation and cutting off the green grass within the lines, with a width slightly greater than the width of the white grass markings.

3. Open the green grass and lay the joint strip flat within the lines drawn on the ground. Apply glue, and the width of the glue should not be less than the width of the white grass marked on the line plus 10cm.
4. Apply joint glue evenly on the edge of the artificial lawn, with a width of no less than 5cm. When the solvent in the glue evaporates until the glue surface is not sticky to the hand, bond the lawn and use a rubber hammer to strike or carefully compact it with machinery.

6、 Fixing the edge of the venue
Apply the joint adhesive evenly and directly to the edges of the site foundation and artificial lawn, with a width of no less than 10cm.
When the solvent in the glue evaporates until the glue surface is not sticky to the hands, bond the lawn and use a rubber hammer to tap or mechanically compact it.
7、 Correction and Cleaning of Artificial Grass Football Field Lawn Construction
Clean up the materials, debris, and garbage on the artificial turf field

9、 Fill with elastic particles

1. When filling elastic particles, it is necessary to ensure that the filling is uniform and the thickness meets the design requirements.
   10、 Inspect and clean the construction site of the artificial grass football field
2. Carefully inspect the size, flatness, and uniformity of the artificial turf football field.
   Clean up the construction site to ensure that it is tidy and beautiful.
   Organize and improve the construction data of artificial grass football fields.
3. Conduct preliminary acceptance of the site in conjunction with the construction and supervision units.